Thread: Home Servers & Network Attached Storage |OT|
Official Thread
@Showdown Installed my two new drives today. Here's my setup;

20240720-154610.jpg
20240720-160349.jpg




Loving that setup. Good stuff duder (y)

You won't regret that case mate. It's the one thing you interact with the most. It can hold up around 20-22 drives, which is pretty insane. I'm installing two of my drives I ordered today, so I'll post some photos later. What parts do you need to get now?

The case itself is probably great but my main gripe with it is having to buy all the type B trays to fill it. I think I read that it only comes with 2 or 4 (can't recall). Then it has 2 cages. But for the trays, it's $20 for 2 of them so that adds up. My already expensive case just got a lot more spendy. The R5 already had 8 bays but I'd be screwed if I needed to go beyond 8 drives (without doing some pain in the butt rigging). So trusting you on your recommendation here :)

This was my build list and I just completed it last night:

SttZFa.png


This is just for the PC itself. For now, I'm pulling a PSU from an old build and using that which is why it's not on the list. I'll upgrade that later as I add drives. I still need to purchase the license for Unraid and I still need to buy all the drives for the array. For those things, I may wait on a sale. I wouldn't be so stingy about this but I just built out a new PC for myself last fall and one for my wife this spring. My wallet can only take so much of a beating.
 
  • Brain
Reactions: Hostile_18
I have a Minisforum NAB6 which I've recently installed Proxmox on as a VM manager. I then have a VM set up for OpenWRT which I use as my main router.

I've purchased a 4 bay USB HDD enclosure that I intend to connect to the NAB6 and set up some kind of NAS software as a VM connected to the external storage bays. I've purchased 2 x 12tb Iron Wolf drives I think. I also intend to set up another VM running a Plex server most likely.

My dilemma is trying to figure out which NAS software to go for. I was originally going to go with TrueNAS Core and then set up the drives in a RAID1 config with mirroring so that the drives are essentially copies of each other in the event of a drive failure I don't lose my data. Downside being that I basically half by total storage amount for redundancy.

Another option I was thinking of was OpenMediaVault which seems to have a bunch of different file system options, not just ZFS the way TrueNAS works, although an option for ZFS exists as a plugin.

I'm wondering if with an OMV set up I could not use ZFS or any RAID at all but instead set up scheduled backups or something for important folders. For example important documents, photos or rare movie/tv shows etc... while the majority of other stuff is just "ok" to lose.

I imagine this would give me more total storage (although not exactly sure how I would set this up...partitions?) but maybe the speed would be a lot less than ZFS if I was to use just ext4 or something. I suppose the biggest speed issue would be turning off RAID?

I guess I'm looking for suggestions, my USB enclosure can take up for 4 x 2.5/3.5 drives so I would like to expand in the future and it sounds like ZFS/TrueNAS maybe makes that an issue.

Any advice would be appreciated.

I've only used Unraid for its hard for me to say. It does seem extreme two copies of everything. For media Radarr and Sonarr would grab everything back in the background media wise, as long as you backed up those apps. With Unraid the largest drive is your parity drive and every other drive can be fully used for storage. Even if you lose a drive and it can't be backed up you only loose that one drive, not the whole array. The downsides are that its slower transferring files to the array.
 
Loving that setup. Good stuff duder (y)



The case itself is probably great but my main gripe with it is having to buy all the type B trays to fill it. I think I read that it only comes with 2 or 4 (can't recall). Then it has 2 cages. But for the trays, it's $20 for 2 of them so that adds up. My already expensive case just got a lot more spendy. The R5 already had 8 bays but I'd be screwed if I needed to go beyond 8 drives (without doing some pain in the butt rigging). So trusting you on your recommendation here :)

This was my build list and I just completed it last night:

SttZFa.png


This is just for the PC itself. For now, I'm pulling a PSU from an old build and using that which is why it's not on the list. I'll upgrade that later as I add drives. I still need to purchase the license for Unraid and I still need to buy all the drives for the array. For those things, I may wait on a sale. I wouldn't be so stingy about this but I just built out a new PC for myself last fall and one for my wife this spring. My wallet can only take so much of a beating.

Ive had a look and pretty sure it comes with 6 trays to begin with. Amazon UK have two packs for £9.99, which come with all the screws and rubber vibration mounts etc. Might be worth shopping around, if you need more than 6.

That's a fair amount of nvme storage, presuming you need that for the services your running. I think I might get a 1tb one actually for app data. When the download folder gets full it stops the operation of my dockers from working correctly. 12 cores is a fair amount if your looking to shave the price down a bit! :)
 
Ive had a look and pretty sure it comes with 6 trays to begin with. Amazon UK have two packs for £9.99, which come with all the screws and rubber vibration mounts etc. Might be worth shopping around, if you need more than 6.

That's a fair amount of nvme storage, presuming you need that for the services your running. I think I might get a 1tb one actually for app data. When the download folder gets full it stops the operation of my dockers from working correctly. 12 cores is a fair amount if your looking to shave the price down a bit! :)

If it comes with 6 trays, that's more than enough to start me off. But yeah, they're $20 Amazon US:

Type B Tray

The two 1TB's are going to be for appdata and VM's/dockers. Think I mentioned it before but the price difference between 1TB and 500GB was negligible so I went with the larger option and will set that up to mirror. The 2TB is the download cache. I'm basing this off of this video:



I'm trying to run the "Optimized" config. After hearing you say that your dockers get jammed up when your downloads get full, now I'm glad I went with this setup.

Did you have a 12 core recommendation?
 
If it comes with 6 trays, that's more than enough to start me off. But yeah, they're $20 Amazon US:

Type B Tray

The two 1TB's are going to be for appdata and VM's/dockers. Think I mentioned it before but the price difference between 1TB and 500GB was negligible so I went with the larger option and will set that up to mirror. The 2TB is the download cache. I'm basing this off of this video:



I'm trying to run the "Optimized" config. After hearing you say that your dockers get jammed up when your downloads get full, now I'm glad I went with this setup.

Did you have a 12 core recommendation?


I'll watch that video tonight, looks interesting. Oh so Two 1tb NVME's, mirroring each other and if one fails app data is copied over? Sounds like a good idea. I have my app data backed up on a plug in app that goes to the array. Also I can view my app data from a share drive and so copied it over onto my gaming pc as well. The 4TB Nvme + App Data is annoying at the moment, but it's only because im downloading 24/7 upgrading everything to remux. Once that's done I will only be downloading a few items per week.

Sorry I don't, if you need 12 cores that's likely the one to get. I was just looking through it as would be my use case, where the heaviest thing it will be doing is serving and transcoding files. Looking at your CPU and large amount of RAM you have something more intensive in mind. I'd definitely stick with Intel for quick sync feature, works well on Jellyfin. Just bear in mind if you go Plex I believe Hardware transcoding requires the paid tier.
 
You're still getting off cheaper than me 😐

That is true and correct me if I'm wrong but we haven't talked about the size of your hard drives yet! lol.

Im yo-yoing over this App data dedicated NVME. At the moment I'm downloading at 60% last two days and with that work flow and Sonarr/Radarr transfering over I'm neither increasing my download cache size nor reducing it. That won't last forever and I'll just be downloading at full speed a couple of files a week after tomorrow (when everything has been upgraded).

So with the app data drives. I currently have it on my download drive as you know. I back that up with Backup plug in to the array and also have a copy over on my gaming PC. So for redundancy that may be enough. Maybe one 1tb drive so its not sharing bandwidth with the cache, but what would be an advantage of getting a second 1tb nvme in my use case?
 
It is done, ordered two 1tb Lexar NVMe SSD's. I'll put App Data, Documents and my retro collection on it and second one to mirror AND externally backup every month. That really is the heart of the work, everything else including media can be re-grabbed by the Arrs. Not that my Media isn't backed up with parity as well. Good thing is my server is getting so heavy I can't imagine a thief carrying it away, so that rules out another potential loss lol.

Upgrades complete, I've got three 16tb disks to clear into the array as well, so I'm all set.

No more spending on tech! lol.
 
  • Cheers
Reactions: Showdown
That is true and correct me if I'm wrong but we haven't talked about the size of your hard drives yet! lol.

Im yo-yoing over this App data dedicated NVME. At the moment I'm downloading at 60% last two days and with that work flow and Sonarr/Radarr transfering over I'm neither increasing my download cache size nor reducing it. That won't last forever and I'll just be downloading at full speed a couple of files a week after tomorrow (when everything has been upgraded).

So with the app data drives. I currently have it on my download drive as you know. I back that up with Backup plug in to the array and also have a copy over on my gaming PC. So for redundancy that may be enough. Maybe one 1tb drive so its not sharing bandwidth with the cache, but what would be an advantage of getting a second 1tb nvme in my use case?

It is done, ordered two 1tb Lexar NVMe SSD's. I'll put App Data, Documents and my retro collection on it and second one to mirror AND externally backup every month. That really is the heart of the work, everything else including media can be re-grabbed by the Arrs. Not that my Media isn't backed up with parity as well. Good thing is my server is getting so heavy I can't imagine a thief carrying it away, so that rules out another potential loss lol.

Upgrades complete, I've got three 16tb disks to clear into the array as well, so I'm all set.

No more spending on tech! lol.

Honestly, you probably went overkill like I did. I really didn't need that cache to be mirrored. I could've done what you are currently doing and just back it up to the array and been fine with it. Truth is that I'm not going to know how I'm going to set everything up until I actually get it set up. But figured I might as well go all out since the sticks were on sale.

What I need to do is get the 30 day trial for Unraid so I can tinker and have a better idea of everything I'll be running.

Oh, as far as the array drives, no we haven't discussed. 16TB's is probably what I'll be going with. Reading that's kind of the sweet spot for cost per TB ratio. And leaning towards WD / HGST Ultrastar enterprise drives. Need to do some more research on whether to go manufacturer recert or refurbished. I think recerts are probably the way to go.
 
  • Brain
Reactions: Hostile_18
Honestly, you probably went overkill like I did. I really didn't need that cache to be mirrored. I could've done what you are currently doing and just back it up to the array and been fine with it. Truth is that I'm not going to know how I'm going to set everything up until I actually get it set up. But figured I might as well go all out since the sticks were on sale.

What I need to do is get the 30 day trial for Unraid so I can tinker and have a better idea of everything I'll be running.

Oh, as far as the array drives, no we haven't discussed. 16TB's is probably what I'll be going with. Reading that's kind of the sweet spot for cost per TB ratio. And leaning towards WD / HGST Ultrastar enterprise drives. Need to do some more research on whether to go manufacturer recert or refurbished. I think recerts are probably the way to go.

I'll be happy to not have the download and uploading of media files, fighting for space with the app data requests. But what put me over the edge in terms of mirroring is that I can put documents, my roms in parity protected SSD. So I get the full speed advantage of SSD and the back up, without having to put it on the hard drive. I spent so long messing about with custom art work and placing special tv episodes, that to do it again would be a nightmare, so it's worth it for the peace of mind.

One key advantage of Unraid that ties into this is that all drives not in use can be auto put into sleep, where's a raid server has to have all devices spinning all the time. So this saves electricity, but also say Documents is on the SSD (for example) I don't have to wait a few seconds for the hard drive to wake up.

That trial for Unraid is really clever. Most people have to put time into their setup and no one is going to want to start from scratch after 30 days lol.

My last 6 drives have been bought here, free world wide shipping and 5 year retailer warranty. Not sure how this compares to US pricing but for the UK £9.68 a TB is REALLY good. https://robertelectronics.co.uk/products/exos-x16-st16000nm001g-256mb-16tb
 
Last edited:
  • Like
Reactions: Showdown
So I'm finally set up with my NAS. I bought a Minisforum NAB6 (Alderlake CPU) with 2x 2.5gb Ethernet ports and some USB 3.2 Gen 2 ports, 32GB RAM and 512GB NVME SSD.

I've set up Proxmox 8.2 as a Hypervisor/Virtual Machine manager

I then set up OpenWRT as a VM as my router. I have OpenMediaVault set up as my NAS software.

I bought a USB C 3.2 Gen 2 HDD enclosure (DAS) and I currently have 2 x 12tb HDD Ironwolf models.

I'm using mergerFS rather than RAID and simply using ext4 instead of ZFS or any of that.

I set up another VM with Jellyfin server on it as my NAS video software. Works really well.

I just bought another 12tb drive to use as a parity drive with SnapRAID so that I have some data redundancy in case a drive fails.

Loving the setup so far, just working on naming my video files correctly for Jellyfin metadata collection.
 
So I'm finally set up with my NAS. I bought a Minisforum NAB6 (Alderlake CPU) with 2x 2.5gb Ethernet ports and some USB 3.2 Gen 2 ports, 32GB RAM and 512GB NVME SSD.

I've set up Proxmox 8.2 as a Hypervisor/Virtual Machine manager

I then set up OpenWRT as a VM as my router. I have OpenMediaVault set up as my NAS software.

I bought a USB C 3.2 Gen 2 HDD enclosure (DAS) and I currently have 2 x 12tb HDD Ironwolf models.

I'm using mergerFS rather than RAID and simply using ext4 instead of ZFS or any of that.

I set up another VM with Jellyfin server on it as my NAS video software. Works really well.

I just bought another 12tb drive to use as a parity drive with SnapRAID so that I have some data redundancy in case a drive fails.

Loving the setup so far, just working on naming my video files correctly for Jellyfin metadata collection.

Matrix [TMDBID-213]
- The Matrix

Breaking Bad [TMDB-1134]
- Season 01
Breaking Bad S01E01 Episode Name
Breaking Bad S02E02 Episode Name


Filebot is good for naming things very quickly. Sonar and Radar also have their renamers.

For File information I include this;

Lost Boys (1999) (1080p Bluray Remux x264 Atmos)

(Note if HDR movie it would also include HDR before 1080p. Since I go for Remuxs or web dls I forgo encode group. If it was an encode I'd include "-group" at the end. Make sure it has the "-" otherwise Radarr and Sonarr won't recognise it as a group.

Tv shows are similar.

Buffy (1997) - S01E01 Welcome to the Hellmouth (1080 WEB-DL x264 EC3)

Obviously include as little or as much meta data as you like but that's what I find essential. Too much and it looks a mess IMO.

Also make sure you decide on a meta data provider to reference (either TVDB or TMDB) as they number tv specials differently in some case so S00E02 (00 indicating a tv special) might be a completely different episode depending on the metadata source. I personally go off TMDB.
 
  • Star
Reactions: IrishWhiskey
If anyone is a Marvel fan you can get the best version of many of these movies not through physical discs or through Disney PLUS but a combination of both. I've just upgraded Doctor Strange and the Multiverse of Madness, Black Widow, Shang Chi, Avengers Infinity War and Endgame with the IMAX enhanced video combined with the lossless True HD Atmos 7.1 tracks of the UHD. Absolutely incredible.
 
Apologies if it's already been discussed, but is it more cost effective to build your own as opposed to just purchasing an NAS from Amazon or something?
 
Apologies if it's already been discussed, but is it more cost effective to build your own as opposed to just purchasing an NAS from Amazon or something?

It can be, but it really depends on what your requirements are and what you want to achieve.

For example there are some Synology NAS out there that are €800+. Now normally these come with their own proprietary OS and features. The pros for these things generally are simplicity of use and quality of life features. They also normally combine a HDD enclosure with the actual NAS server into one box which is convenient and saves space. You can even find some with multiple Ethernet ports and even some with 10Gbit ports.

The downsides to something like this is normally the specs of the box itself tend to be low, where they use kind of weak ARM CPUs, have little RAM and outside of the number of HDDs that can be attached they tend to not really be expandable (some exceptions to this of course). The other problem with most of these is that they often need you to create an online account with the creator and they phone home. That doesn't bother some people however because there is web management they can end up compromising your network and you need to often keep them up to date because there are a lot of documented security issues with them.

If you plan to do more than simply use it to host your storage on the network these things tend to come with many "apps" that do various things, however due to the often weak CPU+low RAM quantity this is often not ideal for these cases. For people who want to put something like Plex, Jellyfin or Emby on their NAS these boxes lack any kind of GPU for transcoding normally which can be an issue.

If you build it yourself then you can build to your own specifications, some people buy second hand old x86 commercial servers or workstations for cheap and use those as their NAS. Other people repurpose old desktop parts when they upgrade to something new.

A downside is that you may need to be fairly techy or be a little comfortable on a Unix command line to set up some of the software side of things yourself. The pro is that you get much more control and (generally) better specs.

One of the big advantages is that you can customize the hardware to your liking. For example if you wanted to you could buy a new desktop case, PSU, MOBO, as many HDD or SSD as you can fit in the box and hell even a discreet GPU for heavy transcoding if necessary. You can buy 10Gbit NICs etc... It all depends on your needs and goals with the project. Of course the more you add the higher the cost will be in the end.

A simpler approach might be taking an old laptop and making that the server potion of your NAS and then you can use USB harddrives or SSDs as your storage and that will probably work quite well for most people. Most laptops have a built in iGPU that you could use for transcoding and they are generally designed to be somewhat low power.

Personally for my approach I went for a Mini-PC (which essentially uses a Laptop CPU with iGPU). The Mini-PC I installed Proxmox which is a hypervisor/virtual machine manager. I set up a VM for my router software, a VM for my NAS software and a VM for Jellyfin to access my video files on my TV etc... It is cool as it is a small low powered device but it packs quite a punch and the cost was not insane on it at all. Plus it has multiple purposes as it is acting as my router too and I can keep adding more VMs if I want to do other stuff, still lots of headroom to play with.

Then I purchased a 4 HDD SATA USB enclosure that I connect to the Mini-PC. I bought my HDDs and put them in the enclosure and then connect to the Mini-PC and configure the software side.

All working great for me. I think I paid around €500 for the Mini-PC and around €160 for the USB HDD enclosure. Which given the utility, flexibility and levels of performance I think that was a bargain especially compared to some of premade ones you can buy. Of course you still need to buy your actual hard drives for the storage so you can add that cost but you would also need to do the same if you went with a prebuilt NAS box.
 
My last 6 drives have been bought here, free world wide shipping and 5 year retailer warranty. Not sure how this compares to US pricing but for the UK £9.68 a TB is REALLY good. https://robertelectronics.co.uk/products/exos-x16-st16000nm001g-256mb-16tb

Are you getting all your drives new? It's showing up as $204 for me which is good for that condition. The recerts/refurbs I'm seeing on serverpartsdeals are $150 to $160 but they're not new. And warranty is also only 2 years. If you go new, definitely more expensive than robertelectronics:


BTW, if anyone is interested, Unraid is running their summer "sale" (it's a joke honestly):


Really wish I would've looked into them more prior to their egregious price increase because I really don't want to pay that much for an OS (I wanted the lifetime, formerly Pro license). I'll probably just pick up the Unleashed license now and upgrade it during a Black Friday sale or something.
 
À
Are you getting all your drives new? It's showing up as $204 for me which is good for that condition. The recerts/refurbs I'm seeing on serverpartsdeals are $150 to $160 but they're not new. And warranty is also only 2 years. If you go new, definitely more expensive than robertelectronics:


BTW, if anyone is interested, Unraid is running their summer "sale" (it's a joke honestly):


Really wish I would've looked into them more prior to their egregious price increase because I really don't want to pay that much for an OS (I wanted the lifetime, formerly Pro license). I'll probably just pick up the Unleashed license now and upgrade it during a Black Friday sale or something.

Yeah brand new, 5 year warranty. Yeah the price increase for Unraid this year is a bummer, but they say it will lead to more features so we shall see. I wonder if you can buy old Unraid keys elsewhere that offer life time cheaper? Think it cost me £90 IIRC for the lifetime, unlimited.
 
Welp, ordered 3x 16TB drives yesterday. Called an audible at the last second and went with Exos instead of Ultrastars. Hopefully that was the right call but seems like Exos are very popular, so we'll see. APC UPS on the way as well. Both should be here tomorrow so looks like I'll be starting that server build this weekend.

An unfortunate side effect of this is it's making me reconsider redoing my entire home network which, while fun, will be time consuming and has the propensity for effing things up. If I was just serving up stuff on my home LAN, I'd just put it there. But me being the generous person that I am, am considering serving up Plex to family which means I need to get this thing on its own network segment. I just don't like the way I have things carved up right now because it could be much more streamlined.
 
Preclearing disks in Unraid...


SxUg69.png





SxUIao.png

I'm dying here...

Will you be using Remux files or encodes? I'm on 950 1080p Remux films and 243 1080p Remux tv shows. About 60tb free.

I'm just looking into if the majority of my clients can support the odd 4k remuxes for a few select titles without transcoding.
 
Will you be using Remux files or encodes? I'm on 950 1080p Remux films and 243 1080p Remux tv shows. About 60tb free.

I'm just looking into if the majority of my clients can support the odd 4k remuxes for a few select titles without transcoding.

That's a good question. I don't know. Until you mentioned remuxes, I didn't even know that was a thing. I've always just downloaded all my linux ISOs based on if they're 720 or 1080 and that's it. But I do want to get a proper Plex setup this time around. And I also would like to open it up for remote access for family. I'm thinking remuxes just off the cuff. For all your TV shows and movies, how much space is that eating up?
 
That's a good question. I don't know. Until you mentioned remuxes, I didn't even know that was a thing. I've always just downloaded all my linux ISOs based on if they're 720 or 1080 and that's it. But I do want to get a proper Plex setup this time around. And I also would like to open it up for remote access for family. I'm thinking remuxes just off the cuff. For all your TV shows and movies, how much space is that eating up?

It's a tough call because there's advantages to both. Here's why I chose remuxes;

+ I would rather have the best quality for things I love than everything under the sun.

+ CONSISTANT high quality. Otherwise your at the mercy of encoding groups, which is fine for mainstream titles but the more niche the less the selection of good groups. Plus I wouldn't want season 1 done by one group, season 7 by another etc.

+ Much better bit rate and sound over streaming versions.

+ Even a 4k remux files that's say 70 gigs. Doesn't actually need a high internet connection to host. 70 gigs divided by 2 hours, divided by 60 mins, divided by 60 seconds is 9.72mbps. 1080p remuxes will be well below this.

- In fairness though a small encode isn't that much different quality wise and is easier to host and you could theoretically get a lot more (but in that respect I have everything I want at the highest quality, I don't see the point getting things I'm not interested in).

I have 204 tb raw inc cache, around 163tb usable after parity and other allocations for my media. Roughly 100tb used for 950 movies, 237 tv shows all remuxs.
 
Irony has already reared its stupid head. I've had my UPS sitting in a box not hooked up yet and it's been there for about 5 days. Late last night, power went out for a split second. All my other stuff came back online except for the Unraid server. Luckily, preclear was finished and I hadn't assigned any disks yet. But lesson learned. Got that APC hooked up with a quickness today.

It's a tough call because there's advantages to both. Here's why I chose remuxes;

+ I would rather have the best quality for things I love than everything under the sun.

+ CONSISTANT high quality. Otherwise your at the mercy of encoding groups, which is fine for mainstream titles but the more niche the less the selection of good groups. Plus I wouldn't want season 1 done by one group, season 7 by another etc.

+ Much better bit rate and sound over streaming versions.

+ Even a 4k remux files that's say 70 gigs. Doesn't actually need a high internet connection to host. 70 gigs divided by 2 hours, divided by 60 mins, divided by 60 seconds is 9.72mbps. 1080p remuxes will be well below this.

- In fairness though a small encode isn't that much different quality wise and is easier to host and you could theoretically get a lot more (but in that respect I have everything I want at the highest quality, I don't see the point getting things I'm not interested in).

I have 204 tb raw inc cache, around 163tb usable after parity and other allocations for my media. Roughly 100tb used for 950 movies, 237 tv shows all remuxs.

You're selling me on remuxes so I'll start with that to see how things go.

How are you controlling your fans BTW? I tried Dynamix System Autofan and it wasn't great. Like, I can't ID any of my fans so I have no idea what it's controlling and I get the feeling that it was controlling my CPU fans (which I don't want). I just want my case fans controlled. Part of the problem is I'm using that Nexus+ 2 fan hub built into the case in addition to a splitter. And I'm not controlling my CPU fan with that hub, I'm plugging directly into the Mobo.
 
Irony has already reared its stupid head. I've had my UPS sitting in a box not hooked up yet and it's been there for about 5 days. Late last night, power went out for a split second. All my other stuff came back online except for the Unraid server. Luckily, preclear was finished and I hadn't assigned any disks yet. But lesson learned. Got that APC hooked up with a quickness today.



You're selling me on remuxes so I'll start with that to see how things go.

How are you controlling your fans BTW? I tried Dynamix System Autofan and it wasn't great. Like, I can't ID any of my fans so I have no idea what it's controlling and I get the feeling that it was controlling my CPU fans (which I don't want). I just want my case fans controlled. Part of the problem is I'm using that Nexus+ 2 fan hub built into the case in addition to a splitter. And I'm not controlling my CPU fan with that hub, I'm plugging directly into the Mobo.

I only have a 4 core cpu so the heating requirements arn't really low. I just went into the bios ran all the case fans and cpu fans individually down until they were not auditable and left them at that. I have never had a heat warning on any component including the drives.

When I turned drives to only power on when needed that reduced the heat even more. I also made sure any NVMEs had a metal heat sink though.

I don't actually have a UPS. Had maybe 3 power cuts in the last 6 months. No damage but it did want to run parity again on boot up.
 
  • Like
Reactions: Showdown
I only have a 4 core cpu so the heating requirements arn't really low. I just went into the bios ran all the case fans and cpu fans individually down until they were not auditable and left them at that. I have never had a heat warning on any component including the drives.

When I turned drives to only power on when needed that reduced the heat even more. I also made sure any NVMEs had a metal heat sink though.

I don't actually have a UPS. Had maybe 3 power cuts in the last 6 months. No damage but it did want to run parity again on boot up.

Bummer. I was hoping there'd be a decent app or plugin to run it from inside the OS kinda like FanControl. That's ok. I can tweak in BIOS. I was getting heat notifications on my spinners during preclear. Those went away when I swapped out the stock fans though.
 
Bummer. I was hoping there'd be a decent app or plugin to run it from inside the OS kinda like FanControl. That's ok. I can tweak in BIOS. I was getting heat notifications on my spinners during preclear. Those went away when I swapped out the stock fans though.

That's odd because we have the same drives and fans, are you in a hot climate? There probably is an app for that I'd imagine.
 
Here's my recommendations but I'm no means an Unraid expert, but these have being essential;

Plug In's
GPU Statistics - To make sure gpu transcoding is working fine.
Intel GPU Top - To make Unraid use Intel Quick-Sync.
Recycle Bin - Any deleted files on any all shares, have its own recycle bin, in case you want to restore anything (works the same as in windows).
Unbalanced - Allows viewing and moving of files between discs.
App Data Backup - Saves the USB data and Docker App data to an another location (i.e SSD App Data saved to the Array, exported to another PC etc).
 
  • Strength
Reactions: Showdown
That's odd because we have the same drives and fans, are you in a hot climate? There probably is an app for that I'd imagine.

Nope. Not terribly. I'm just stupid about fans and airflow in my cases. Over worry is probably a better way of putting it. Dynamix System Autofan was the app but it's eh. They do have scripts you can implement as well but I don't want to screw with that if I don't have to. The server is in an actual "server" room so it's not like I have to worry about noise, just power draw.

Here's my recommendations but I'm no means an Unraid expert, but these have being essential;

Plug In's
GPU Statistics - To make sure gpu transcoding is working fine.
Intel GPU Top - To make Unraid use Intel Quick-Sync.
Recycle Bin - Any deleted files on any all shares, have its own recycle bin, in case you want to restore anything (works the same as in windows).
Unbalanced - Allows viewing and moving of files between discs.
App Data Backup - Saves the USB data and Docker App data to an another location (i.e SSD App Data saved to the Array, exported to another PC etc).

A few of these I came across. There were quite a few others that I saw that looked like they needed to be staples but I'll start with these (minus the GPU since I'm just using the CPU for transcodes for now).
 
Nope. Not terribly. I'm just stupid about fans and airflow in my cases. Over worry is probably a better way of putting it. Dynamix System Autofan was the app but it's eh. They do have scripts you can implement as well but I don't want to screw with that if I don't have to. The server is in an actual "server" room so it's not like I have to worry about noise, just power draw.



A few of these I came across. There were quite a few others that I saw that looked like they needed to be staples but I'll start with these (minus the GPU since I'm just using the CPU for transcodes for now).

Sounds good. I'm only using my CPU too but Intel has Quick Sinc which is effectively a internal video encoder unless I'm really messing up 😅 GPU statistics is a good way to know it's all working correctly. :)
 
So finally just got done getting all my *arr apps config'ed. Was running into issues downloading a series via Sonarr earlier that I'm still trying to tshoot but I just successfully dl'ed and loaded a movie into my Plex container (Tango and Cash BTW). Requested it in Overseerr and within 5 minutes, it's in Plex and ready to go. All automated. Ho-ly SHIT this is a game changer. @Hostile_18, YTMND. This is incredible. If I can get this working for Sonarr, I'm not even gonna sweat having to build out a new PC/server for this.
 
So finally just got done getting all my *arr apps config'ed. Was running into issues downloading a series via Sonarr earlier that I'm still trying to tshoot but I just successfully dl'ed and loaded a movie into my Plex container (Tango and Cash BTW). Requested it in Overseerr and within 5 minutes, it's in Plex and ready to go. All automated. Ho-ly SHIT this is a game changer. @Hostile_18, YTMND. This is incredible. If I can get this working for Sonarr, I'm not even gonna sweat having to build out a new PC/server for this.

Yeah they make everything so much easier. Especially for new series or discs, where it adds them as soon as they are released with no input needed from ourselves. What ever the problem is with Sonarr it can be solved. I haven't actually used Overseerr does it add much to the experience? :)
 
  • Like
Reactions: Showdown
Yeah they make everything so much easier. Especially for new series or discs, where it adds them as soon as they are released with no input needed from ourselves. What ever the problem is with Sonarr it can be solved. I haven't actually used Overseerr does it add much to the experience? :)

I guess I don't know what the usual setup is. It actually took me a while to figure out what the actual workflow is for all these apps and there are still things I'm not super clear about (like how Sonarr and Radarr differentiate different types of media... assuming it's via profiles but still... there's overlap between genres). Do you normally search by Sonarr and Radarr and initiate things there? If so, then Overseerr (or Ombi) are huge. Seriously, look into adding Overseerr to your mix if you don't have it. It makes things even easier. You get a web interface where you can go in, search for whatever you want, request it, and it sends those requests to the other *arrs. And it'll cover full seasons instead of going out and picking episodes one at a time. The other reason it's great is I'd like to give family access to my Plex server. If I give them the Overseer link, they can go in, make their own requests, and have their media ready for them without me having to do anything.

... well, if I can get Sonarr fully functional. It seems to be having issues with cartoons/animated shows and not sure why. I followed Riffspheres guide on Youtube to get the meat of this up and running. He bases his guide off of Trash but adds multiple instances of the *arr's. Supposedly, it helps with searching/sorting but I feel like it just adds more complexity than it really needs.
 
Interesting I'll check it out later this week, as I have a few days off coming up. I do go into the arr's separately, but I don't have to search by episode or anything with tv shows, it just gets everything associated with it. I'd be tempted to strictly go with Trash guides and tweak to your preference from there.

Here's my Sonarr. One thing I prefer is if you are going for Remux's group tier list is not that important, so just give each tier 1 point more than the other. That way more important variables such as IMAX, HDR, or ATMOS are the deciding factor on what gets picked up. The hardest decision is if you value 1080p Remux over Web-DL 4K, I do.



 
Interesting I'll check it out later this week, as I have a few days off coming up. I do go into the arr's separately, but I don't have to search by episode or anything with tv shows, it just gets everything associated with it. I'd be tempted to strictly go with Trash guides and tweak to your preference from there.

Here's my Sonarr. One thing I prefer is if you are going for Remux's group tier list is not that important, so just give each tier 1 point more than the other. That way more important variables such as IMAX, HDR, or ATMOS are the deciding factor on what gets picked up. The hardest decision is if you value 1080p Remux over Web-DL 4K, I do.



So I got really stupid with mine. Like I mentioned before, I've got multiple instances of Sonarr and Radarr running based on Riff's recommendations. 3x to be exact. One instance for regular 1080p, one for 4k, and one for anime, on both Radarr and Sonarr. Each has their own folder and own profiles/quality settings/custom formats. Not totally sure the exact reasoning for this but it had something to do with organization and categorizing things appropriately. He specifically mentioned how anime gets messed up with regular TV shows so I just took his word for it. But my folder structure is based on what he does and it's pretty discombobulated:

Code:
├── data
│   ├── downloads
│   │   ├── torrents
│   │   │   ├── complete
│   │   │   │   ├── radarr
│   │   │   │   ├── radarr-4k
│   │   │   │   ├── radarr-anime
│   │   │   │   ├── sonarr
│   │   │   │   ├── sonarr-4k
│   │   │   │   └── sonarr-anime
│   │   │   ├── incomplete
│   │   │   └── watch
│   │   └── usenet
│   │       ├── complete
│   │       │   ├── radarr
│   │       │   ├── radarr-4k
│   │       │   ├── radarr-anime
│   │       │   ├── sonarr
│   │       │   ├── sonarr-4k
│   │       │   └── sonarr-anime
│   │       ├── incomplete
│   │       ├── nzbs
│   │       └── watch
│   └── media
│       ├── movies
│       │   ├── 1080p
│       │   ├── 4k
│       │   └── anime
│       └── tv
│           ├── 1080p
│           ├── 4k
│           └── anime

Aside from the fact that it's made it a nightmare to troubleshoot things, it completely jacked up my Plex because it started mixing shows together. I was able to fix it but still. Also discovered that with the current custom formats and quality settings (which are based on Trash), it'll reject grabs unless I go in and tweak down settings somewhat.

I may switch it up to OG Trash since that actually seems more simple.
 
  • Shocked
Reactions: Hostile_18